5,000 + Reviews

Gauges

19 Items

    • Used both for testing pipework installations with air for leaks and setting correct gas pressures
    • Extruded cover slides off and may be clipped over the base for standing the tool vertically during use
    • Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level
    Compare
    • Precision mechanism
    • Ø55mm dial and locking, rotating bezel
    • Lifetime guarantee
    Compare
    • Used to measure the size of the slots in an air vent
    • To calculate the area of ventilation provided by a vent where this info is not readily available
    • Gauge is stepped in increments of 1mm and will measure vent slots from 5mm up to 10mm
    Compare
    • Stainless steel drill gauge
    • Metric sizes
    • Permanently etched graduations
    Compare
    • Connects three pieces of rubber hose together for convenient connection to U Gauge
    Compare
    • Stainless steel
    • Thread/pitch identification gauge
    • Metric
    Compare
    • Compact design and precision mechanism
    • Ideal for automotive applications
    • Ø41mm Dial and rotating bezel
    Compare
    • Made from tough plastic
    • Used both for testing pipework installations and checking and setting correct gas pressures
    • Extruded cover slides off and may be clipped over the base for standing the tool vertically during use
    Compare
    • Used both for testing pipework installations with air for leaks and setting correct gas pressures
    • Extruded cover slides off and may be clipped over the base for standing the tool vertically during use
    • Hanging tab permits vertical hanging from suitable protrusions. Marked in millibars, the scale adjusts for zeroing water level
    Compare
    • Precision mechanism with Ø50mm dial
    • Measuring Range: 10-18mm
    • Accurate method of measuring a bore
    Compare
    • Precision mechanism with Ø55mm dial
    • Accurate method of measuring a bore
    • Measuring Range: 50-160mm
    Compare
    • Precision mechanism with Ø50mm dial
    • Measuring Range: 35-50mm
    • Accurate method of measuring a bore
    Compare
    • Used to test for leaks after installation or repair of any drain or pipeline system
    • Will test up to 100mm (4in) water gauge pressure irrespective of pipe diameter
    • Hinged lid of the gauge folds back so that it forms a base behind the gauge for added stability.
    Compare
    • Precision mechanism with Ø50mm dial
    • Measuring Range: 18-35mm
    • Accurate method of measuring a bore
    Compare
    • Stainless steel
    • Thread/pitch identification
    • Imperial
    Compare
    • Designed to measure water flow rates
    • Used for diagnosing if a combi boiler or water heater may need de-scaling.
    Compare
    • 3/4in BSP thread for fitting to taps
    • Maximum Pressure: 11 bar
    Compare
    • Used for testing pipework installations and for checking and setting correct gas pressures
    • Extruded cover slides off and may be clipped over the base for standing the tool vertically during use.
    • Hanging tab permits vertical hanging from suitable protrusions
    Compare
    • Precision ground base electronic gauge
    • Fine adjustment control carriage
    • Metric or Imperial
    Compare